The anchoring end should be connected to D-rings or other anchor points

The Tape Trap™ simplifies the installation of tool lanyards by creating retrofit tether points on hand tools that lack manufactured attachment points or captive holes

Back pads are worn over welding gloves to protect the back of the hand from radiant heat

USB flash memory for bump test and event log storage

Stratos 6′ Dual leg energy absorbing lanyard

Fall Tech 727620LE- 20' Leading Edge Harness fit test The anchoring end should be7 32 Galvanized Steel Cable; Internal Inertial Brake And External Shock Pack; Glass filled Nylon Housing; 1 Connecting Carabiner and 1 Load indicating Swivel Carabiner. Fall Tech Spec Sheet Download 727620LE Free Fall Tech leading edge instructions click here