A clamping arm can be attached to the ball adapter

11mm hardened Ni-Cr-Mo alloy steel shackle

Slips right over the filter

2014 POLARIS RZR XP 4 1000 EPS

keep the M5 washers but replace the bolts with the new 25mm bolts

INA - Replacement Ball Bearing for KTM/Husqvarna Balancer Shaft - Type HK2512-B Bike-Husaberg 570 450 350 A clamping arm can beFeatures The bearings are particularly suitable for applications with a very small radial section height on account of their very low cross sectional height Used if the housing bore is not suitable as a raceway for needle roller and cage assemblies Can support high radial loads Require a considerably smaller radial design envelope than machined needle roller bearings Usually run directly on the shaft Permit relatively high speeds Easy to mount Require