To modify the cross-member some DIY cutting and welding needs to be done

There are no springs

For the rear we have an upper link and a lower link these will allow to set up your car for better traction(Upper arm will replace the spring carrier arm)

Double adjusters included for easy static toe adjustment

This is a bolt-on fitment for the factory turbocharger as fitted to the 2

Set of 20 SILVER Changeable star bolts 12x1,25 + Key Center Caps To modify the cross-member someMaximum diameter: 20mm; Thread lenght: 27mm Can be used only with 25mm or wider in diameter conical mounting holes. Maximum movement up to 2 mm, for example 4x100 to 4x98.